Call Us For Solution
+65 6570 9918
Siloair Dust Collector
The Donaldson Torit® DCE® Siloair cartridge dust collector can be applied to almost any venting situation to provide the right solution to silo-venting problems and filter virtually all types of powders and granules. The Siloair range consists of six units with filtration areas from 10m2 to 28m2. Silo cartridges are manufactured of spun-bonded polyester media pleated and moulded into a star-shaped based resulting in optimum filtration area and cleaning performance.
- One piece moulded cartridge header and assembly for optimum sealing and cleaning characteristics
- Complete fully assembled unit for minimum on-site installation
- High efficiency filtration media for continual low emission levels
- Compact, low profile design for easy cartridge access and maintenance
- Generous cartridge spacing within the filter, producing low internal gas velocity around the cartridges, for effective cleaning performance
The performance and reliability of the Siloair is derived from a combination of advanced materials technology and high performance reverse jet cleaning. This ensures effective dust release and a continuous level of operation.
Siloair cartridges are manufactured of proven Ultra-Web SB media, a combination of Ultra-Web nanofibre technology with a sturdy spunbond polyester substrate. The media is pleated and moulded into a star-shaped base section. This results in the optimum filtration area and cleaning performance. The risk of dust build-up on the bottom of the filter is eliminated.
The range consists of six units, with filtration areas from 10m2 to 28m2. Dual cartridge length options and a range of four integral fans are available. The result is a dust collection unit that can be applied to almost any venting situation, effectively filtering virtually all types of powders or granules.
The Siloair Dust Filter is a compact venting filter designed for easy installation at any point in a material conveying system. The equipment is suitable for direct mounting onto e.g. conveyors and hoppers. It can be used as part of a larger dust control system to ensure compliance with relevant health and safety legislation.